If you have equipment that uses hydraulic systems, it needs to have repairs done when seals blow. The problems with fluid leaks may start off small and slowly get worse as time goes on. You need to know what hydraulic seals fail and make sure you have the parts you need for quick repairs. The following hydraulic seal repairs are often needed when equipment starts to lose power due to fluid loss:
Seals Blowing At Pumps
One of the first areas where hydraulic systems have problems with seals is pumps. This is because the hydraulic pumps are where your systems are under the most pressure. Therefore, you want to make sure you have the right seals for the pump and connections to the lines that deliver fluid. Sometimes, the problems with hydraulic pumps are due to the blown seals and fluid loss that cause systems to not have the power that is needed to get work done.
Issues With Hydraulic Manifolds
There may also be issues with hydraulic manifolds that have blown seals. These are the components of hydraulic systems that deliver the fluid to pistons and other parts to get work done. Sometimes, the seals of manifolds can fail and cause problems with hydraulic systems. The blown seals might be for the outside casing, or they may be parts inside the manifold. If there are problems with the seals inside the manifold, it may need to be rebuilt or replaced.
Damaged Hydraulic Piston Seals
The pistons of hydraulic equipment can also be areas where you have problems with systems. When there are problems with these pistons being damaged, it can cause seals to fail. This happens due to the hydraulic systems being under more pressure than what they were designed for. If the seals in these areas fail, they are going to need to be replaced when doing the other repairs your equipment needs.
Other Blown Hydraulic Seals
You may also need to replace other seals of equipment that fail. Sometimes, these can be seals around components, lines, and fittings to hydraulic systems. If you have been using your equipment for a long time, take note of the hydraulic seals in these areas that fail more frequently. These are areas where you want to invest in extra spare parts to ensure you can complete repairs when they are needed.
Hydraulic seal failures cause leaks that eventually cause your equipment to not work. Contact a hydraulic supplies service to get the hydraulic seals and other parts you need to repair leaks and do other maintenance.
Share