Industrial buildings like large warehouses and factories should definitely be properly protected with surveillance systems. After all, without them, it will be hard to watch out for problems like employee theft and break-ins. In a larger building like this, a lot of cable has to be installed for many surveillance systems. During installation, a lot of things can go wrong. These are some of the things that might go wrong when the cabling is being installed in your industrial building.
1. Using Too Much Cable
For one thing, the more cable that is used, the more of an expense there is for your installation. Plus, having more cable means that there is more of a chance of something going wrong later on. You'll definitely want to make sure that your cabling is installed in a way that is efficient and not wasteful. This is possible with just a little bit of prior planning.
2. Damaging the Cable During Installation
Cabling that is used for industrial surveillance systems is designed to be made for heavy-duty use and durability. However, it can still be damaged, particularly during installation. If it's cut the wrong way, twisted too much when being moved around, or otherwise damaged, then it could result in material waste and problems with your industrial surveillance system.
3. Installing the Cable in a Too-Accessible Place
Lastly, there is always the potential that the cable could be installed in a place that will be too accessible. This might not sound like a bad thing, but the last thing that you want is for the cable to be accessible to those who might want to tamper with it. For example, if someone breaks into your building, they might attempt to cut the wires or otherwise cause damage. This could disable the system, leaving you unable to keep an eye on what is going on or provide evidence that law enforcement can use. Therefore, you'll want to make sure that the cabling is installed in a way that it is not easily accessible by those who you don't want to access it.
There are various mistakes that can be made when cabling is being installed for industrial surveillance systems. Of course, avoiding these common mistakes is definitely important. To help prevent these mistakes, make sure that you choose the right commercial cabling company for the job. Also, make sure that you talk to them about your concerns so that you can make sure that the job is done right.
Share